This is a mod for RailRoad Tycoon 3 which adds a new car type to carry Pulpwood.
THIS MOD SHOULD BE USED IN CONJUNCTION WITH THE GOODS BOXCAR MOD!

created by Michael Rountree
http://wpandp.com/RRtycoon.html

Installation instructions:
First, be sure to back up the "Pulp-" files that will be overwritten by the following procedure.

Extract the ZIP file and then move or copy the files into their proper locations.  
The following files go into your game's Data\CargoTypes folder: 
Pulpwood.cty  (BACKUP FIRST!)

The following files go into your game's Data\EngineTypes folder:
Pulp.cct
PulpA.cgo
PulpA.car
PulpB.cgo
PulpB.car
PulpC.cgo
PulpC.car
PulpD.cgo
PulpD.car

All other files go into you game's Data\UserExtraContent folder.

With this properly installed, your Pulpwood will get loaded onto a flatcar, rather than into a covered hopper!  The default covered hopper load presumably represents the pulp in solution, but this was not typically hauled by rail as far as I know.  And, the "pulpwood" that would be provided by a logging camp would just be logs that do not make the grade to become lumber.  Bulkhead flats were used to carry these stacks of logs, looking like giant stacks of firewood.  I made the A-era car look the same as a car carrying logs, but from then on they should look a little different from the log loads.  

Note that using this car will require that you also install the Goods Boxcar mod, otherwise your Goods loads will look like wood after 1900!

If you enjoy using this mod, feel free to let me know:
paranoid@wpandp.com